ShatPTO-800

800watt+

 

Overview

ShaftPTO-800 Generator was designed for yachts with higher energy demands. 

This model generates over 25kWh of energy in 24 hours - over 800 watt continiously.

Power generation starts at 4.5 knots of boats speed and reaches full rated output at 5.5-6 knots.

ShaftPTO-800 installation is trivial and typically takes less than an hour for entire installation. This project can be accomplished by a cruiser with basic DIY skills. Once properly installed ShaftPTO-800 generator will run for thousands of hours with zero maintenance

 

 

Installation Considerations

 

ShaftPTO-800 model "clamped on" over existing shafts with diameters from 35 - 55mm. Minimum 120mm of shaft need to be available to position the generator (see dimension drawings link). 

Prop shaft has to be in good condition: dents, irregular surface, corroded or pitted shafts will likely result in poor installation.

Unit retainer link has to be mounted in an appropriate position (see drawing link). The link can be glued or screwed to the bulkhead / engine supports etc. For convenience of installation retainer arm can be adjusted to 30-90cm length.
 

 

Technical Specificcations

 

Rated output: 800 watt | 40 amp | 24 volts

Height: 190mm, Width: 160mm, Length: 100mm

Shaft diameter: 35 to 55mm
Shaft speed range: 0 - 1500 RPM
Environment protection: IP68 - mechanical unit can run submerged in salt water
Weight: 2.4kg

 

Price: $2,995.00